Adobe Creative Suite Video feature request, easily copy and paste a Lumetri color from Premiere Pro to After Effects without exporting a LUT

 

As someone who works extensively between After Effects and Premiere Pro, I do love Adobe Dynamic Link (though it could use an update for sure), there is one thing that I wish could come easily between the two programs, and that is Lumetri Color Effects.

Yes you can pass the Lumetri Effect them through via Dynamic Link, but that is better for sequences, than individual shots. And yes you can export a .cube effect from your Lumetri Color, which is a LUT. The LUT can then be added in Lumtri, but it isn’t just repeating the Lumetri Effect, it is a Lumtri with a LUT added to it (and since After Effects and Premiere Pro use different Color spaces since After Effects uses RGB vs YUV), it is easier to tweak a bit if it is the Lumetri Color effect.

Now the easiest for the user would be if you could copy and paste the effect.

The Lumetri Color panel is one thing, but it is also an effect.

And the Lumetri effect shows up in After Effects as an effect as well.

Now I am assuming copy and paste would be difficult as some program would need to be running to catch the copy and move it over (something in creative cloud), but this would be absolutely ideal.

Now the solution is to make all your selects in Premiere and send it over via Adobe Dynamic Link then use the lumetri off those. And this does work, but it isn’t as easy as copy and pasting from one to the other for sure.

Or you can send out individual LUTS from the Lumetri Color Tab.

And select Export Cube to export a LUT that you can then add onto a Lumetri basic correction or a look you can use in the Creative section of Lumetri (and this is good because you can control the strength of the effect).

Now they could put in a Creative Cloud sync like you can do with Essential Graphics templates, but most of the time I am using my own Adobe login so the sync is useless, and I have always thought it needed some more job specific settings, like they only show up if you select the job you are on, and would download the templates to the job folder so that when you back it up they are there for anyone using the job especially in the future.

Things to try when Premiere Pro has issues exporting a sequence

If you use Premiere Pro enough, you will run into issues, and the most frustrating issue of all can be when you have problems exporting a sequence, especially when you are on a deadline. This can be absolutely terrifying, and you need to get your sequence exported ASAP!

So I thought I would give you some things that have been known to work for me.

The first thing to try is to trash the current render of your timeline and re-render. If you have a rendered timeline and you go to export a sequence you can save time and sometimes export easier by selecting use renders.

You can see this select above in blue, USE PREVIEWS. When your sequence is rendered and things are going well, it will use your Previews to render and should greatly speed things up.

Still sometimes the renders can get screwed up so clean fresh renders are a first step.

A second thing to try is is if you are compressing to a different format than you are editing in, is to try to match the sequence settings.

Especially if you are using the Previews this can speed things up and with no cross compression make the video easier to export. You can then recompress using Media Encoder, which should go quickly. Sure it is an extra step, but if it gets a working sequence out, it is worth it.

Next if things are really bad and you can’t get the sequence to export at all, you should move the sequence to a new clean project. 

You should make a new project and drag the Sequence over, which will bring just it and the associated media files.

Most of the files are even brought over organized as they previously were, though unfortunately the organization of the sequences has not come over. Still save this Project and export from this project. This might mean that there is corruption in your project file.

Sometimes I move all the files in a project into a new fresh project and it can solve some issues.

Earlier of my posts talked about trashing the preferences and that is another thing I would try.

Hopefully when you run into the problems of exporting a sequence these things can help, and hopefully they can help you.

In Premiere Pro if the paste attributes menu item stops working, try right clicking in the timeline

 

Ok until recently this had never been a problem for me, but when it happened it was super annoying. My edit menu command Paste Attributes command just stopped working in Premiere Pro 2019, neither the menu item or the keyboard shortcut option-command-V was working, and even after resetting the preferences the problem persisted. I did some research and it is was not just me and there is a workaround that always seems to work.

If the menu commands and keyboard shortcut for this stop working, then you can use the right click (or control-click) on the mouse to copy.

And do the same right click on the destination clip and paste attributes this way and it works.

Now I have no idea if this is fixed in newer versions, as it just recently happened to me in 2019, and here is a post about it at the Adobe Forums on how to fix it.

It is just good to know if you run into this, just do it from the timeline, and it will still work.

Adobe releases Premiere Pro March 2021 version 15.0 Update

 Adobe has released the official 2021 Release of Premiere Pro with version 15.0.

New features include a much needed all new Captions engine.

Media Replacement in Motion Graphics Templates.

Equitable Language with changes in terminology to reflect diversity and inclusion.

A woohoo feature is a Faster Warp Stablizer.

Team Projects has had improvements.

You can now copy and paste audio effects in the audio track mixer and legacy audio effects have been removed.

I just wish the Speach to Text feature was out of beta, but it hasn’t even hit a public beta yet, so I am guessing it will be a while, damn.

Pro Media Tools from Digital Rebellion is their tool for Media and Workflow Management

 

So I have been a user of the other Digital Rebellion tools, Post Haste, Preference Manager, and Pro Maintenance Tools, but I have never actually used it’s Pro Media Tools available for $99. It does have some tools that I would use on occasion if I had them.

Particularly it’s Batch File renamer with full support for Frame Numbers, it’s ability to manage markers, the ability to manage clup metadata, and especially it’s Timeline Tricks, where you can collapse tracks, remove disabled clips, strip filters and markers (this could be useful in emergencies and the collapse track would be quite useful at times. And it’s ability to scan for broadcast safe on files.

Again a batch of useful tools that if you need them it is good to know about them in the case that you do need them.

Pro Maintenance Tools from Digital Rebellion can help maintain, optimize and troubleshoot Premiere Pro, Avid Media Composer, Final Cut Pro X and and Final Cut Pro 7

 

So I have talked about Digital Rebellion before and Post Haste and Preference Manager, but they have 2 packages of programs to repair and I have been a user of Pro Maintenance Tools since Final Cut Pro 7.0.

This suite of tools has a tool to Analyze Crashes, Repair Corrupt Files in a project (or at least help you see which ones are corrupt), Look up error messages, Manage Plugins, Schedule clearing of caches and preferences and a plug in installer.

It has a huge amount of tools (though of course Post Haste and Preference Manager are free), and most you don’t need until you do. This has saved me on a few projects where some media got corrupted, so it is a great tool to have around just in case, or to get in an emergency.

Corrupt Clip Finder also has often shown me bad JPEG’s, though I have had the problems a lot less since I stopped using JPEG’s due to corruption issues.

If you are having issues the $129 is quite worth the price of admission.

Premiere Pro stability and compression, and why I don’t use JPEG images or MP3 audio in my projects

 

Stability. Stability seems to be the thing most people complain about with Premiere Pro. I see all the time people complaining about it crashing.

AVID of course is going to have more stability if you do it’s normal workflow of importing footage, because you are compressing into an AVID format and of course that is going to be more stable, AMA of course, using external formats in AVID was not every going to be as stable.

To keep Premiere Pro stable I try to go for less compression, and pick a format and stick with that. Most of my deliveries are ProRES HQ, and if that is the case I want my footage to be be ProRES because it is going to be less compressed than many other highly compressed formats, especially formats like H.264. This wouldn’t apply if I was using a RAW format like ProRES RAW or Blackmagic RAW, which I would use with Proxy’s to speed thing up (though I would use ProRES Proxy and not H.264 Proxys).

So before import, I like to recompress my heavily compressed footage to ProRES HQ (or straight ProRES if that is the delivery spec). Yes this of course takes more time, but I have found that the stability that it gives me means that I save time on the back end, so the up front time is certainly worth it. And I use Media Encoder to it instead of using Ingest in Premiere Pro.

With Ingest you can Transcode, create Proxies, Copy or Copy with Proxies, and it is a great workflow when it works, but I have had bad crashes that have screwed things up and not finish the import or transcode process, so I tend to do transcodes myself before I import them. And yes this means I can’t start working right away, but I think the lost time up front is saved at the end when you don’t have any export issues.

I will talk about the Proxy workflow in another post, but I tend to do that in the program, but let it do it on it’s own, not while continuing to work because of crashing issues I have had. Best to let the machine go overnight, and if you can check it in remotely all the better.

And my compression issues extend beyond just you video files.

Since my early days of editing on Final Cut Pro 4-7, there have been issues with JPG images. Sometimes they are fine, and sometimes they can stop an entire project from opening, and it can happen randomly after working fine. Bad things happen with JPG images so I do not import JPG images into my projects.

Before using a JPEG I convert it to another format. Now I have seen people complain about PNG images causing problems in project, though I haven’t had that problem. I tend to convert to PNG, though the less compressed the better. And if you want to go even better you can go TIFF files, but they can end up being absolutely huge.

To convert images in a batch I use the $39.95 GraphicConverter from Lemkesoft

I use the Convert And Modify command to convert my images from JPGS.

Setting Convert on the let, and PNG as the format (or TIFF if you would like). The folder with footage to covert is in the middle, and you select hte ones you want to convert, and the to folder is on the right, and you press start selected function.

I feel the same about Audio files, heavily compressed audio files like MP3 or M4A I convert to WAV files using Adobe Media Encoder.

And yes this is all in the “Assistant Editor Stage” before editing gets started. And the net result has been that Premiere Pro has been very stable for me. Sure sometimes I have issues, but since dealing with highly compressed footage, stills and audio before a project the program runs much more stable for me.

Honestly if you think about it, it is like using Premiere Pro more like AVID. You think of it as importing the footage to an AVID codec. And then everything is the same, and so will just run better.

And I often get A & B cameras that are different cameras, and thus different formats. Think about the computer having to uncompress different kinds of formats at once. Of course it is going to do better if everything is all one format.

And more compression means processing power, so the less compressed things are the less processing power you are using, and that can help with stability.

Everything you can do to make the whole thing run easier will mean less crashes and things working better.

Your GPU is very important with Adobe Premiere, so control your monitor resolution with SwitchResX to save video memory, especially on an iMac or iMac Pro

 

When my MacPro 4,1 finally kicked the bucket I was devastated, especially since the new MacPro wasn’t out yet, and I needed a machine to edit on. The solution was the very powerful iMac Pro with the Radeon Pro Vega 64X 16GB. Now that blew my old video card out of the water, but video editing apps can use every bit of power you have and more, so you want to save as much video processing power as you can.

The problem is that the default settings or even scaled settings on an iMac Pro or even an iMac are made to make the screen look amazing, not save on video memory, and for a long time the OS X control panels have removed the important statistics on the display control panel.

Now if you hover over the choices it tells you what resolution it is like and that scaled resolutions might affect performance, but they don’t tell you what the default resolution is actually doing.

This is where the awesome SwitchResX comes in. The app is $16, or $250 for a site license. It takes a little playing to get it all set up nicely (especially turning off all the resolutions that you don’t want).

It runs in your menu bar, and you can customize to remove all the resolutions you don’t want, but when you go into the iMac Pro or iMac’s resolutions you see where I am going.

You can see I have chosen 2560×1440 which is the normal default resolution, but I have not chosen the HiDPI version. HiDPI is what Apple does to make the monitor look great, it takes your resolution and runs it twice to subsample and make it look better, but basically whatever video ram it is using for your primary display it is doubling it to make the display look nicer.

For a video editor this is a huge no no, don’t waste your video memory, it is precious! Make sure to set your display to a non HiDPI resolution so that you are not wasting your video memory!

Of course this isn’t all that SwitchResX can do, you can actually set different resolutions for different apps and have it change as you switch apps. Now I have tried that out and it worked very well, but I have realized I just like one resolution for my 2 monitors, and try and save as much video memory as I can, so that is why I use SwitchResX, and the less video memory you have the more important this is.

I am assuming this will be the same with M1 iMacs, but they don’t exist yet. If they stay like the current M1 macs and share memory with the mac, then it is even more important to use less memory for your display so that you can use more for editing!

Mac Performance Guide on Upgrading to Big Sur, all downsides except the Thunderbolt Hub support

  

Mac Performance Guide has as an article on how the upgrade to Big Sur has been nothing but negatives, except that you need to upgrade to it to get Thunderbolt Hub Support which was added in Big Sur.

I know this site is usually very negative on the coverage of Mac OS upgrades, but the upgrades do seem to add more problems than they add, and usually add hits to performance.

And I have personally held off on the upgrade to Big Sur, though I really do need the Thunderbolt hub support so I can have more drives connected than I currently do.

Of course I also can’t upgrade because where I am currently working refuses to upgrade past Adobe Creative Cloud 2019, and that version does not work on Big Sur, you need to run at least 2020 to run on Big Sur. Now when the built in Speech to Text comes out of Beta maybe I can upgrade, though I might as well hold off for now.

The first thing to try if there is an issue with Adobe Premiere Pro, is to reset the Preferences

 

So the first tip I can give if you are having something going wrong in Premiere Pro is to reset your preferences. This can be easily done on a Mac by holding down Option on the Mac or the ALT key on windows till the splash screen appears, you can also reset the preferences and the plug-in cache by hitting Shift-Option on Mac or Shift-Alt on Windows.

I find that this solves a good deal of problems that occur on in Premiere, and is a great thing to try first. 

 

This will reset a whole lot including your recent projects, and I usually then go to my Sync Settings to download my recent Preferences. You will often have to sign into your adobe account first.

To do sync settings normally you can find them in the preferences, they are near the bottom in Sync Settings:

And here you can chose what is synced, it shows your account, and the 3 settings, as well as to Ask my preference when syncing. I do this so I don’t accidentally overwrite any good preferences.

Now sometimes the preferences on the server can also be bad and you have to start fresh, but hopefully that won’t happen.

If you find that happens, there is another 3rd party solution, Preference Manager from Digital Rebellion, that can made backups and restorations for Premiere Pro, Final Cut Pro X, Avid Media Composter, Final Cut Pro 7, Lightworks and Pro Tools. I will post about that next.