Knights of the Editing Table has updated Excalibur to 1.1.3 with ability to mark clip, control track targeting and select all disabled clips

Knights of the Editing Table have updated their awesome keyboard launcher Excaliubur for Adobe Premiere Pro to 1.1.3.

Here is the Change Log for this app that you will quickly find to be indispensable. For current users you download the update from the Excalibur settings app within Premiere Pro.

NEW

Sequence module:
– Add Marker to Clip
– Target Video/Audio Tracks
– Mute Video/Audio Tracks
– Lock Video/Audio Tracks
– Sync Lock Video/Audio Tracks

Selection module:
– Select Clip Above/Below
– Extend Selection
– Select All Clips after/before Playhead
– Invert Selection
– Select All Disabled Clips

Preferences module:
– Display Color Management
– Snap playhead in Timeline
– Selection Follows Playhead
– Linked Selection
– Transparency Grid
– Show Rulers
– Show Guides
– Snap in Program Monitor

Other:
– Multiply, divide, percent operations are added for Position/Scale/Rotation and etc
– Excalibur Settings could be open from a search bar

FIXED

– “Copy Frame to Clipboard” didn’t work on some macOS machines
– “Export Media/Selected Clips” in a search bar used project location as an export path. Now it defaults to Premeire Pro last used export path (which could be controlled with Compass)
– Unnecessary undo step was performed for Duration/Speed command if duration/speed couldn’t be changed or was the same for an affected clip
– Effect presets that used “Vector Motion” (part of Essential Graphics) added additional “Vector Motion” effect instead of changing values of an existing one
– Optimized “Nest Clips” command
– Optimized “Paste Clip on Same track” command
– Optimized preloading of a search bar
– Enter pressed multiple times in a search bar caused Excalibur to execute command multiple times

—–

This app really is amazing and will guaranteed speed you up within Premiere. My biggest problem is working on other machines where it is not installed! Honestly I might be buying multiple licenses when I eventually have to go back to working in an office instead of working from home.

The Hidden cost of Apple changing it’s hardware architecture for editors and motion graphics artist is plug-ins

 

So of course Apple is moving to the M1 processor for all of it’s computers, moving away from intel. This is the 3rd hardware switch Apple has made, from it’s initial motorola processors, to power pc, to the ARM based M1 processors. And while the current M1 is very fast, but not a pro processor, especially with shared graphics and normal ram and a limit of 16 GB of total RAM. 

For everyone sticking with Apple this will eventually mean new hardware to move to M1 from Intel, though for a few years at least Apple will continue to support Intel hardware.

The hidden cost though, that is something different, and for a professional editor or motion graphics artist the hidden cost is plugs-ins.

Plug-ins can be an expensive investment, but can really help your workflow and speed things up and let you do things that couldn’t do without them. And the move to M1 will certainly be a paid upgrade, even for those still on Intel hardware. And those plugs in upgrades can cost hundreds, and over the upcoming period there are going to be a lot of upgrades to M1.

And while DaVinci and Final Cut Pro X already run on M1’s and the Premiere Pro Beta runs on M1, to get your old plug-ins to run you have to run them via Rosetta 2, which means running the Intel based versions of the host software to get the plug-ins working. And that is going to mean running the software slower through emulation, and could cause many issues and add more stability issues.

Now of course subscription based plug-ins will have the price included in the subscription, but the lack of more money for the upgrade might mean a lot longer before they upgrade to M1, even if it should mean they should upgrade sooner since you are already paying monthly or yearly for the software.

And yes the fact that our Intel Hardware will last a few more years with upgrades means that the upgrades will happen over a few years, so we can pay it, but for me it is a lot of plug-in upgrades, that will be followed by an expensive hardware upgrade to whatever form Pro M1 Macs take.

And of course their will be the exceptions, companies that treat their customers correctly and will upgrade to the new architecture without charging anything. One such company is RE:Vision Effects, which I got an e-mail from and they are developing M1 versions of the current versions of all their plugs ins. And have already released OpenFx and Twixtor M1 betas for FXPlug versions and RSMB for FXPlug is next.

Adding motion blur to slow motion shots in Premiere Pro with ReelSmart Motion blur from RE:Vision Effects

 

ReelSmart Motion Blur

So another plug-in that you don’t need until you do, and when you do it is great to know it is there.

Now the main use for this plug-in is for work with 3D imagery. If instead of rendering Motion blur in a 3D image, you have the 3D artist render you a motion vectors pass, then with this plug-in you can add motion blur after the fact and have full control over it, which is a huge thing, and absolutely necessary, but that is only scratching the surface of what this can do.

This plug in can automatically track every pixel in an image and add realistic motion blur, and you can control the amount. Blur can also be removed. This doesn’t sound like much but it really is. Especially if you are given say footage that is high speed which then has very little motion blur, and you are running at normal speed. The footage just won’t look right because of the lack of motion blur, and adding in motion blur can make the footage look normal and correct.

Now once again there are 2 versions, the normal for $109.95 and the pro for $269.95, the pro lets you do object separation using matts, track points, alphas and simple splines and the aforementioned 3D motion Vector Input.

Once installed it shows up in your Re:Vision Plug-ins folder
If you have a good GPU turn on GPU to speed things up and you can control the amount of blur by using the blur amount control. This Goes up to 10, or can down to -2 to remove motion blur.

I have made a quick little video using the same footage of my Shar Pei Boba Fetch as the last video on Re:Vision Effects Twixtor. This time I show the 59.94 footage playing at normal speed in a 23.976 timeline and then adding in more motion blur, we have it at the default .50 at 1.0 and at 2.0.

Once again not the ideal footage or a demo, but some of my own footage, so I can use it, and you can certainly see the effects.

The best way to slow down your video, Twixtor from Re:Vision Effects

 

Twixtor

While Premiere has the ability to slow down your footage, and it has a newer higher quality version called Optical Flow (called Pixel Motion in After Effects). It is certainly better than plain frame blending, but it is not the highest quality slow motion you can get. For the highest quality post slow motion the answer has always been the expensive but worth it TWIXTOR from Re:Vision Effects.

Clip speed in Premiere Pro is in the Clip Menu.

This brings up the Speed Panel, and for best results select Optical Flow from the drop down menu.

Twixtor comes in 2 versions, Standard and Pro and is available for a variety of platforms. The version I use is the After Effects/Premiere Pro version. The standard version is $329.95 and the Pro version is $595.00, both fairly expensive, but as I have said quite worth it.

The Pro version gives you the ability to really tweak what the auto track does, lets you use matte’s and alphas to enhance your tracks, as well as splines, and the ability to work with motion vectors from a 3D system. If you have a really important shot to slow down the Pro version is certainly worth the extra money, though you may get away with the normal version. And they have video based tutorials for their effects on their sites, and they are really worth going into to learn the ins and outs.

Twixtor shows up in your Video Effects RE:Vision Plugs-Ins (RSMB is ReelSmart Motion Blur which I plan on talking about in a later post).

The first thing to realize when working with twixtor is it works based on the whole clip as it can see it, so to specify the in points you need to Nest (in Premiere or Pre-Compose in After Effects) and in the sequence the sequence needs to be longer to work on the extent of the clip, so you might want to double or triple your clip in that nest/pre-comp.

This is the clip in the sequence with playhead parked on first frame

First frame of clip I want to slow.
Twixtor Effect Added

Speed Changed to 20%

First frame becomes first frame of clip.

So nest your clip in timeline

If you want clip longer as slow, you need to lengthen it, so double clip next to open. Since I want 20% speed, I duplicate clip 5 times.

Put twixtor on Nest in original sequence.

Here are the settings I am using. I always use GPU as I have a decent one and that speeds things up, but it is much slower within Premiere than within After Effects. Different settings will give you different results, so play around for sure. I ususally got for Motion Weighted and Smart Blend, and add a little Motion blur Compensation though it really slows things down. I have also set my Image Prep to Delinearize.
I did a video to demonstrate, it is UHD and shot 59.94 but is in a 23.976 Sequence, I have shown the footage as if 23.967, then slowed down, then slowed down to 20% using Premiere Pro’s time interpolation with Frame Sampling then Frame Blending, then optical flow and with Twixtor. This isn’t ideal footage, but Twixtor still looks the best. Of course this is recompressed by YouTube, but you should get the idea.

Red Giant releases new awesome VFX Suite, but in doing so have killed the Keying Suite and the Effects Suite

So Red Giant has released the new VFX Suite for Keying, Tracking, Cleanup and Visual Effects Compositing. They have a full blog post with many YouTube videos on features and how to use the new tools.

The only bummer is that they have killed their Keying and Effects suits to do so. I say bummer, not because the new tools don’t look awesome, but because you have to owned the previous to get a special offer upgrade (it isn’t just available on the site) and you get no discount for owning both previous suits.

Supercomp looks impressive though, basically it makes compositing much easier, and allows all layers to effect your comp, so you don’t have to do a bunch of pre-composing to make your comps looks the best they can, and it is all GPU accelerated.

And Primatte has reached version 6. Many people just go with Keylight, but I have always found that Primatte is faster and easier to reach a good key, so I am excited about this.

Key Pin tracker seems to supercharge corner pin tracking (though the demo does show some features they need to add, like copying the from and to points automatically by a single button).

Spot Clone Tracker looks super easy and powerful.

Optical Glow also looks amazing, and should negate the need to every use the built in After Effects glow which never was very good.

I already have some ideas for the new Chromatic Displacement plug in.

Will have to see how the new Knoll Light Factory 3.1 is. I used to use it all the time, but have completely given up on it, because of Video Copilot’s Optical Flares plug in, which I think surpassed it years ago.

And Shadow and Refection looks cool when needed.

VFXER reviews Zaxwerks ProAnimator 8

VFXER has a great new review of the new Zaxwerks ProAnimator 8. It is a good review and does the comparisons with Element 3D and Cinema 4D.

Here is the first video from Zaxwerks on new features. And it seems that the newest feature is speed, as they say fast many many many times in the video! And it does look fast even with Ray Tracing turned on, which Element 3D cannot do.

And the Shadows sounds great, as you don’t get shadows from Element 3D, and it includes Lens Flares and Lighting Rigs within the plug in (or stand alone app) which you need Optical Flares to do this with Element 3D.

Honestly I had written off 3D Invigorator Pro as soon as I tried out Element 3D, as it was just so much easier to use and more powerful and quick. And I like how Element 3D integrates the 3D so well into After Effects 3D world (which it looks like it still does better), but this version is the first to impress me in a while. The biggest issue for me is price. $399 is more than basic Element 3D and Optical Flares from VideoCopilot. And even the $149 upgrade price seems a bit steep. And I don’t know that I need it now that I have element 3D and can use Cinema 4D within after effects. Still looks like the upgrade they should have done long ago!

Red Giant has updated it’s Shooter Suite to version 12.5

Red Giant has updated their Shooter suite to Version 12.5.

It is $399 for full and $99 for upgrades from version 12.

It has a new version of BulletProof 1.2, Plural Eyes 3.5, it now includes Denoiser II, LUT Buddy, and now Instant 4K for uprezzing.

A great suite for on set work, and Plural Eyes is essential for all shoots with separate audio!

Red Giant has Updated Universe to 1.1 with 3 new Free and 6 Premium Effects!

Red Giant has updated Universe to 1.1 with 3 new Free and 6 New Premium Effects. And 3 updated Effects.


What's New in Red Giant Universe 1.1 from Red Giant on Vimeo.

Very cool. Lets hope they keep pouring out updates this quickly. The great thing about the subscription model is if they keep getting in money they can keep updating.